Cart
The brand Audio technica
Learn more about the Audio technica brand and discover the entire catalog.
The largest network of stores in France
Find all the information on our superstores and our specialized boutiques.
Contact an expert
Our musician and enthusiast tele-consultants are here to answer all your questions.
Full dj set
The At-Lp140X(silver) is an Audio-technica turntable for DJs and audiophiles.
- Enjoy high fidelity sound and professional DJ performance with direct drive, high torque and speed stabilization.
- Fully manual operation
- Adjustable dynamic traction control
Selectable speeds 33/45/78 rpm
- Professional die-cast aluminium tray, mass damped, anti-resonance, with matt felt.
- AT-HS6 universal ½" and AT-XP3 DJ cartridge with 0.6 mil conical pen with 0.6 mil binder
- Balanced S-shaped reading arm with hydraulically damped lifting control,
- height adjustment and lockable footrest.
- Dedicated output at the phone (5.5 mV)
- Strobe tray with speedometer
- Forward/reverse and variable pitch control with quartz speed lock
- Retractable light target with plug for easier identification in low light conditions
- Dampened base construction to reduce coloration of low feedback frequencies
- Includes: detachable RCA output cable (double RCA male to double RCA male), power cable, 45 rpm adapter, counterweight, felt mat and removable hinged cover.
Available in black (AT-LP140XPBK) and silver (AT-LP140XPSV)
- Enjoy high fidelity sound and professional DJ performance with direct drive, high torque and speed stabilization.
- Fully manual operation
- Adjustable dynamic traction control
Selectable speeds 33/45/78 rpm
- Professional die-cast aluminium tray, mass damped, anti-resonance, with matt felt.
- AT-HS6 universal ½" and AT-XP3 DJ cartridge with 0.6 mil conical pen with 0.6 mil binder
- Balanced S-shaped reading arm with hydraulically damped lifting control,
- height adjustment and lockable footrest.
- Dedicated output at the phone (5.5 mV)
- Strobe tray with speedometer
- Forward/reverse and variable pitch control with quartz speed lock
- Retractable light target with plug for easier identification in low light conditions
- Dampened base construction to reduce coloration of low feedback frequencies
- Includes: detachable RCA output cable (double RCA male to double RCA male), power cable, 45 rpm adapter, counterweight, felt mat and removable hinged cover.
Available in black (AT-LP140XPBK) and silver (AT-LP140XPSV)
Lire la suite
Technical sheet
- Drive Method Direct drive
- Type 3-speed, fully manual operation
- Motor High-torque DC motor
- Speeds 33-1/3 RPM, 45 RPM, 78 RPM
- Pitch Variation +/-8% or +/-16% or +/-24%
- Turntable Platter Die-cast aluminium
- Starting Torque 2.2 kgf-cm
- Wow and Flutter <0.2% WRMS (33 RPM)
- Signal-to-Noise Ratio >50 dB
- Output Level 5.5 mV nominal at 1 kHz, 5 cm/sec
- Power Supply Requirements 115/230V AC, 60/50 Hz
- Power Consumption 4.3 W
- Weight 10.0 kg
- Model AT-XP3
- Type VM Dual Magnet
- Output Voltage 5.5 mV (@ 1.0 kHz, 5cm/sec)
- Vertical Tracking Force Range 2.0 to 4.0 g (standard 3.0 g)
- Stylus Shape Conical
- Stylus Size 0.6 mil
- Recommended Load Impedance 47,000 ohms
- Weight 6.2 g
- Type Balanced S-shaped tonearm with detachable headshell
- Effective Length 230.5mm
- Overhang 16mm
- Maximum Tracking Error Angle Less than 3 degree
- Applicable Cartridge Weight 3.5 - 8.5 g
- Anti-skating Range 0-4 g
More specifications
Fewer specifications