Cart
Akg C414 XLII Stereo Set
- Read reviews (0)
- Related accessories
- Similar products
The brand Akg
Learn more about the Akg brand and discover the entire catalog.
The largest network of stores in France
Find all the information on our superstores and our specialized boutiques.
Contact an expert
Our musician and enthusiast tele-consultants are here to answer all your questions.
Wired microphones set
AKG C 414 XL II Stereo paired microphone pair with exceptional performance and quality, providing consistent performance and precise location of the microphone pair over the entire frequency range.
As a result, each factory-fitted pair of C 414s is built from thousands of microphones selected by AKG's advanced computerized matching method.
This provides the best possible correlation over the entire frequency range of the microphones and almost identical sensitivity for outstanding three-dimensional recordings.
Contents of the case:
- 2 x C 414 XLII
- 2 x SA 60: microphone clamp
- 2 x H 85 : elastic suspension for the microphone
- 2 x W 414X : foam windscreen
- 1 x H 50 : stereo mounting strip
- Individual frequency curve with serial number and date code
- Transport case
As a result, each factory-fitted pair of C 414s is built from thousands of microphones selected by AKG's advanced computerized matching method.
This provides the best possible correlation over the entire frequency range of the microphones and almost identical sensitivity for outstanding three-dimensional recordings.
Contents of the case:
- 2 x C 414 XLII
- 2 x SA 60: microphone clamp
- 2 x H 85 : elastic suspension for the microphone
- 2 x W 414X : foam windscreen
- 1 x H 50 : stereo mounting strip
- Individual frequency curve with serial number and date code
- Transport case
Lire la suite
Technical sheet
- Hand Microphone No
- Condenser microphone
- AKG C 414 - A legend since 1971
- Nine selectable pickup patterns enables to choose the perfect setting for every application
- Lock Mode all controls can be disabled easily for trouble-free use
- Peak Hold LED even detects shortest overload peaks
- Incredible Dynamic Range of 152 dB
- Three switchable different bass cut filters and three pre-attenuation levels
- Leading-edge technology and state-of-the-art components ensure shortest signal path and extra protection against moisture
- Polar pattern Omnidirectional, wide cardioid, cardioid, hypercardioid, figure eight and 4 intermediate settings
- Frequency range 20 to 20,000 Hz
- Sensitivity 20 mV/Pa (-34 dBV) ± 0.5 dB
- Maximum sound pressure level 200/400/800/1600 Pa = 140/146/152/158 dB (0/-6/-12/-18 dB) for 0.5% THD
- Equivalent noise level 6 dB-A (0 dB preattenuation) (IEC 60268-4)
- Signal/noise ratio (A-weighted) 88 dB
- Preattenuation pad 0 dB, -6 dB, -12 dB, -18 dB, switchable
- Bass cut filter slope 12 dB/octave at 40 Hz and 80 Hz; 6 dB/octave at 160 Hz
- Impedance <=200 ohms
- Recommended load impedance >= 2,200 ohms
- Supply voltage 48 V phantom power to DIN/IEC
- Powering approximately 4 mA
- Connector 3-pin XLR to IEC
- Finish dark grey/gold
- Dimensions 2.0 x 1.5 x 6.3" (50 x 38 x 160mm)
- Weight 10.6oz (300g)
More specifications
Fewer specifications
