Dpa 4188-DC-F-F00-LH

Read reviews (0)
Related accessories
Similar products

825,00 €

Free delivery
Low prices guaranteed
Satisfied or refunded
3-years warranty
Ref : 84734

Not available at this moment

Stock in store

Not available in store

INFORM ME OF ITS ENTRY IN STOCK

I want to be notified by email

The brand Dpa

Learn more about the Dpa brand and discover the entire catalog.

Discover

The largest network of stores in France

Find all the information on our superstores and our specialized boutiques.

find out more

Contact an expert

Our musician and enthusiast tele-consultants are here to answer all your questions.

+33 181 930 900 email

Headset microphone

The Micro DPA 4188 is a micro headband that attaches to both ears.

It adapts to all ear sizes.
It offers a precise and natural sound, with effective protection against plosives.
It comes with two different sized windscreens, a protective cap for the capsule, a cable clip.

Technical sheet

Microphone connector Other connectors
Type of microphone Electrostatic

Directional pattern: Cardioid
Principle of operation: Pressure gradient
Cartridge type :Pre-polarized condenser
Frequency range 20 Hz - 20 kHz
Frequency range, ±2 dB, Near field 2-3 cm (0.8 - 1.2 in) 100 Hz - 20 kHz with 3 dB soft boost at 8 - 20 kHz
Sensitivity, nominal, ±3 dB at 1 kHz 6 mV/Pa; -44 dB re. 1 V/Pa
Equivalent noise level, A-weighted Typ. 26 dB(A) re. 20 µPa (max. 28 dB(A))
Equivalent noise level, ITU-R BS.468-4 Typ. 38 dB (max. 40 dB)
S/N ratio (A-weighted), re. 1 kHz at 1 Pa (94 dB SPL) Typ. 68 dB(A)
Total harmonic distortion (THD) - Legacy < 1% up to 123 dB SPL peak, < 1% up to 120 dB SPL RMS sine
Total harmonic distortion (THD) - CORE < 1% THD up to 137 dB SPL peak
Dynamic range - Legacy Typ. 95 dB
Dynamic range - CORE Typ. 111 dB
Max. SPL, peak before clipping 144 dB
Output impedance From MicroDot: 30 - 40 Ω. From DAD6001-BC: 100 Ω
Cable drive capability Up to 300 m (984 ft) with DAD6001-BC XLR Adapter
Output balance principle Signal balanced with DAD6001-BC XLR Adapter
Common mode rejection ratio (CMRR) > 60 dB from 50 Hz to 15 kHz with DAD6001-BC XLR Adapter
Power supply (for full performance) Min. 5 V to max. 50 V through DPA adapter for wireless systems
Current consumption Typ. 1.5 mA (microphone). 3.5 mA with DAD6001-BC XLR Adapter
Connector MicroDot
Color Black or beige
Weight Microphone boom: 0.8 g (0.03 oz). Earhook: 1.1 g (0.04 oz). Cabel: 6.6 g (0.23 oz). Total: 8.5 g (0.30 oz)
Microphone diameter 5.4 mm (0.21 in)
Cable length 1.3 m (4.3 ft)
Cable color Black or beige
Cable diameter 1.6 mm (0.06 in)
Polarity +V at MicroDot pin for positive sound pressure (and pin 2 on DAD6001-BC XLR adapter)
Electromagnetic compatibility (EMC) Fully compatible
Temperature range -40°C to 45°C (-40°F to 113°F)
Relative humidity (RH) Up to 90%