Dpa 4288-Dc-F-B00-Lh

665,00 €

Not available at this moment

Stock in store

Not available in store

INFORM ME OF ITS ENTRY IN STOCK

I want to be notified by email

The brand Dpa

Learn more about the Dpa brand and discover the entire catalog.

Discover

Find all the information on our superstores and our specialized boutiques.

find out more

Our musician and enthusiast tele-consultants are here to answer all your questions.

+33 181 930 900 email

Directional model: Cardioid
Operating principle: Pressure gradient
Cartridge type: Pre-polarized condenser
Frequency response: 20 Hz to 20 kHz
+/-2 dB, near field 2-3cm: 100 Hz to 20 kHz (soft boost 4-6 dB at 15 kHz)
Nominal sensitivity: 6 mV/Pa; -44 dB re. 1V/Pa (+/-3 dB at 1 kHz)
Equivalent noise level :
A-Weighted: Typ. 26 dB(A) re. 20µPa (max. 28 dB(A))
ITU-R BS.468-4: Typ. 38 dB (max. 40 dB)
Signal-to-noise ratio : Typ. 68 dB(A) (re. 1 kHz at 1Pa (94 dB SPL))
Total Harmonic: Distortion<1 percent THD up to 137 dB peak SPL
Dynamic range: Typ. 111 dB
Maximum sound pressure level: 144 dB
Output impedance: 30 to 40 Ohms (100 Ohms if used with DAD6001 (sold separately))
Cable drive capacity: Up to 300m with DAD6001-BC XLR adapter (sold separately)
Output balance principle: Balanced signal with XLR adapter DAD6001-BC (sold separately)
Common mode rejection ratio: >60 dB from 50 Hz to 15 kHz with DAD6001-BC XLR adapter (sold separately)
Power supply: Min. 5V to max. 50V per DPA adapters (sold separately)
Current consumption: Typ. 1.5 mA (microphone) (3.5 mA with XLR adapter DAD6001-BC (sold separately))
Connector: MicroDot
Helmet color: Beige
Microphone diameter: 5.4 mm
Microphone length: 12.7 mm
Cable length: 1.25m
Cable colour: Beige
Rope diameter: 1.6 mm
Temperature range: -40°C to 45°C
Relative Humidity: Up to 90 per cent