Cart
new
Dpa DPA 2028-B-SE2
- Read reviews (0)
- Related accessories
- Similar products
- Free delivery
- Low prices guaranteed
- See our Terms
- 3-years warranty
Pre-order
contact us
Stock in store
Not available in store
INFORM ME OF ITS ENTRY IN STOCK
I want to be notified by email
Go
The brand Dpa
Learn more about the Dpa brand and discover the entire catalog.
Microphone buying guide
What microphone should you buy to record voice, guitar or drums? Everything is explained through this buying guide!
Contact an expert
Our musician and enthusiast tele-consultants are here to answer all your questions.
Vocal microphones
Designed to meet the demands of live singing, the 2028 vocal microphone is a handheld condenser microphone that delivers transparent, dynamic and accurate vocal reproduction. Ideal for concerts, places of worship (HoW), broadcasts or any other stage use, it guarantees a voice that cuts through the mix, without compromising on clarity.
Simple to use, just plug it in to reveal the full richness and presence of the voice. Its capsule, optimized for live performance, ensures excellent feedback control and proximity management.
This model incorporates an adapter compatible with Sennheiser wireless systems: 2000, 6000, 9000, evolution and D1, making it an ideal hybrid solution for mobile artists or demanding sound engineers.
Simple to use, just plug it in to reveal the full richness and presence of the voice. Its capsule, optimized for live performance, ensures excellent feedback control and proximity management.
This model incorporates an adapter compatible with Sennheiser wireless systems: 2000, 6000, 9000, evolution and D1, making it an ideal hybrid solution for mobile artists or demanding sound engineers.
Lire la suite
Technical sheet
- Directivity
- Supercardioid
- Operating principle
- Pressure gradient
- Capsule type
- Pre-polarized condenser
- Frequency response
- 20 Hz - 20 kHz
- Effective range (±2 dB at 12 cm)
- 100 Hz - 16 kHz
- 3? order permanent low-pass filter at 80 Hz
- Sensitivity (nominal, ±3 dB at 1 kHz)
- 5 mV/Pa; -46 dB re. 1 V/Pa
- Equivalent noise level (A-weighted)
- Typ. 22 dB(A) re. 20 µPa (max. 23 dB(A))
- Total harmonic distortion (THD < 1%)
- 136 dB SPL RMS, 139 dB SPL peak
- Dynamic range
- Typ. 117 dB
- Max. SPL level (THD 10%)
- 160 dB SPL peak
- Nominal output impedance
- 150 Ω
- Minimum load impedance
- 1 kΩ
- Cable capacity
- 100 m (328 ft)
- Balanced output principle
- Impedance balancing with active control
- Common-mode rejection ratio (CMRR)
- > 50 dB at 1 kHz
- Power supply (for full performance)
- P48 (phantom power)
- Current consumption
- max. 2.5 mA
- Connector
- XLR-3M (Pin 1: ground, Pin 2: signal + phase, Pin 3: - phase)
- Weight
- 286 g (10.1 oz)
- Microphone diameter
- 48 mm (1.9 in)
- Capsule diameter
- 19 mm (0.75 in)
- Microphone length
- 188 mm (7.4 in)
- Maximum output voltage (RMS)
- 9 V RMS ; 19 dBV ; 28 dBu
- Polarity
- +V on pin 2 for positive sound pressure
- Temperature range
- -40°C to 45°C (-40°F to 113°F)
- Relative humidity (RH)
- up to 90% RH
- Color
- Matt black
More specifications
Fewer specifications
