Cart
Dpa ST4006A couple stereo
- Read reviews (0)
- Related accessories
- Free delivery
- Low prices guaranteed
- Satisfied or refunded
- 3-years warranty
Not available at this moment
contact us
Stock in store
Not available in store
INFORM ME OF ITS ENTRY IN STOCK
I want to be notified by email
Go
The brand Dpa
Learn more about the Dpa brand and discover the entire catalog.
The largest network of stores in France
Find all the information on our superstores and our specialized boutiques.
Contact an expert
Our musician and enthusiast tele-consultants are here to answer all your questions.
Wired microphones set
Stereo pair with 2 x 4006A, clamps and windscreens in Peli Case
Lire la suite
Technical sheet
- Hand Microphone No
- Directivity
- Omnidirectional
- Operating principle
- Pressure
- Capsule type
- Pre-polarized capacitor
- Frequency response
- 10 Hz - 20 kHz
- Effective range (±2 dB)
- 10 Hz - 20 kHz
- Sensitivity (nominal, ±2 dB at 250 Hz)
- 36 mV/Pa; -28.9 dB re. 1 V/Pa
- Equivalent noise level (A-weighted)
- Typ. 15 dB(A) re. 20 µPa (max. 17 dB(A))
- Equivalent noise level (ITU-R BS.468-4)
- Typ. 27 dB (max. 29 dB)
- Distortion (THD < 1%)
- 133 dB SPL RMS, 136 dB SPL peak
- Dynamic range
- Typ. 121 dB
- Max. SPL level (THD 10%)
- 146 dB SPL peak
- Switchable attenuator / filters
- 0 dB / -20 dB
- Nominal output impedance
- 200 Ω
- Minimum load impedance
- 2 kΩ
- Cable capacity
- 100 m (328 ft)
- Balanced output principle
- Impedance balancing with active control
- Common-mode rejection ratio (CMRR)
- > 60 dB
- Power supply (for full performance)
- P48 (phantom power)
- Current consumption
- 2.8 mA
- Connector
- XLR-3M (Pin 1: ground, Pin 2: signal + phase, Pin 3: - phase)
- Weight
- 163 g (5.7 oz)
- Microphone diameter
- 16 - 19 mm (0.6 - 0.75 in)
- Capsule diameter
- 16 mm (0.6 in)
- Microphone length
- 170 mm (6.7 in)
- Maximum output voltage (RMS)
- 8,0 V
- Polarity
- +V on pin 2 for positive acoustic pressure
- Temperature range
- -40°C to 45°C (-40°F to 113°F)
- Relative humidity (RH)
- Up to 90% RH
- Matching tolerance (frequency response and sensitivity)
- ±0.5 dB
- Phase deviation (stereo kit)
- < 5°
- Color
- Matt black
- Polar diagram
- Omnidirectional
More specifications
Fewer specifications
