Cart
The brand Earthquaker devices
Learn more about the Earthquaker devices brand and discover the entire catalog.
The largest network of stores in France
Find all the information on our superstores and our specialized boutiques.
Contact an expert
Our musician and enthusiast tele-consultants are here to answer all your questions.
Switch pedal
The Four to One Mixer is a simple and compact 4-channel mixer with independent level controls and a phase switch for each channel. It was primarily designed for use with the One to Four Splitter to create four parallel signal paths, but it can be used anywhere you need to mix four different sources into a single output.
This high-headroom pedal offers a high input impedance of 1 MOhm and a low output impedance of 100 Ohms, ensuring that all signals maintain their sonic integrity, even over long cable runs. This pedal's high input impedance allows it to handle a wide variety of instruments without distortion or clipping: guitars, basses, synthesizers, drum machines, and more!
Phase switches for each channel help correct any issues that may arise when mixing signals of opposite polarity. Used with the Four to One Splitter and Flexi Loops™, you can create incredible parallel signal paths with the flick of a switch!
• Phase -/+: Use this switch to choose the channel's output phase. Some pedals or instruments invert the signal's phase, which can cause major problems when mixed with other, non-inverted signals. If you have an inverted signal, set the Phase switch to "-" to correct the polarity. In most cases, this switch should remain in the "+" position.
• Level: Adjusts the channel's output volume.
This high-headroom pedal offers a high input impedance of 1 MOhm and a low output impedance of 100 Ohms, ensuring that all signals maintain their sonic integrity, even over long cable runs. This pedal's high input impedance allows it to handle a wide variety of instruments without distortion or clipping: guitars, basses, synthesizers, drum machines, and more!
Phase switches for each channel help correct any issues that may arise when mixing signals of opposite polarity. Used with the Four to One Splitter and Flexi Loops™, you can create incredible parallel signal paths with the flick of a switch!
• Phase -/+: Use this switch to choose the channel's output phase. Some pedals or instruments invert the signal's phase, which can cause major problems when mixed with other, non-inverted signals. If you have an inverted signal, set the Phase switch to "-" to correct the polarity. In most cases, this switch should remain in the "+" position.
• Level: Adjusts the channel's output volume.
Lire la suite
Technical sheet
- Controls : Level, switch phase (+ / -) X4
