Fluid audio F8S

Read reviews (0)
Related accessories
Similar products

VIDEO

349.00 €
Ref : 90333

339,00 €

Free delivery
Low prices guaranteed
Satisfied or refunded
3-years warranty

In stock

shipped under 5/7 days

Stock in store

Not available in store

The brand Fluid audio

Learn more about the Fluid audio brand and discover the entire catalog.

Discover

Monitor speaker buying guide

Consult this guide to make sure you don't go wrong when buying monitoring speakers!

To consult

Contact an expert

Our musician and enthusiast tele-consultants are here to answer all your questions.

+33 181 930 900 email

Subwoofer

- Composite speakers with 8" paper cone and rubber damping diaphragm
- Power amplifier: 200 Watt RMS class D type
- Frequency response: 30 - 200 Hz
- Front volume control
- Bass-Reflex port on the front
- Balanced XLR and 6.3 mm jack / unbalanced RCA inputs
- XLR balanced outputs and 6.3 mm unbalanced jack
- Adjustable low-pass filter: 50 Hz - 200 Hz
- Flat" or "Punch" setting options
- Signal-to-noise ratio: >100 dB (typical, A-weighted)
- Polarity: a positive signal at the + input causes the subwoofer membrane to move forward.
- Overheat, transient and subsonic protection circuit protections
- Input impedance: 20 Ohm balanced, 10 kOhm unbalanced
- Input sensitivity: 85 mV (pink input noise producing 97 dBA of SPL output at 1 m distance with maximum level control
- Amplifier standby function
- Phase controller
- Plywood enclosure with vinyl cladding
- Foot pedal switch connector to activate and deactivate F8S
- Protection against interference
- Output voltage limiter
- External main fuse
- Power supply: 220 - 240 V ~ 50 Hz
- Dimensions: 340 x 254 x 270 mm
- Weight: 7.9 kg

Technical sheet

Monitor color Black

Composite speakers with 8" paper cone and rubber damping diaphragm
Power amplifier: 200 Watt RMS class D type
Frequency response: 30 - 200 Hz
Front volume control
Bass-Reflex port on the front
Balanced XLR and 6.3 mm jack / unbalanced RCA inputs
XLR balanced outputs and 6.3 mm unbalanced jack
Adjustable low-pass filter: 50 Hz - 200 Hz
Flat" or "Punch" setting options
Signal-to-noise ratio: >100 dB (typical, A-weighted)
Polarity: a positive signal at the + input causes the subwoofer membrane to move forward.
Overheat, transient and subsonic protection circuit protections
Input impedance: 20 Ohm balanced, 10 kOhm unbalanced
Input sensitivity: 85 mV (pink input noise producing 97 dBA of SPL output at 1 m distance with maximum level control
Amplifier standby function
Phase controller
Plywood enclosure with vinyl cladding
Foot pedal switch connector to activate and deactivate F8S
Protection against interference
Output voltage limiter
External main fuse
Power supply: 220 - 240 V ~ 50 Hz
Dimensions: 340 x 254 x 270 mm
Weight: 7.9 kg