Cart
The brand Schoeps
Learn more about the Schoeps brand and discover the entire catalog.
Microphone buying guide
What microphone should you buy to record voice, guitar or drums? Everything is explained through this buying guide!
Contact an expert
Our musician and enthusiast tele-consultants are here to answer all your questions.
Description
The Schoeps CMC6 +MK4 mono set is a package with a SCHOEPS CMC 6 microphone amplifier and 1x MK 4 capsule.
The CMC 6 U is designed for standard 48 and 12 volt phantom power. Its circuitry recognizes the supply voltage and adjusts itself automatically. Its performance characteristics remain essentially the same in both cases; the main difference is that the current draw at 12 volts is greater than at 48 volts. However, the 12-volt mode consumes less power and might be preferred for battery recording.
The MK 4 is often preferred by opera singers and other skilled singers.
But its natural and transparent character is also very suitable for pop and rock applications, on stage or in the studio, where equalization is part of the program.
A microphone with a clear, neutral sound quality is the ideal starting point when special "colouring" is required.n
The CMC 6 U is designed for standard 48 and 12 volt phantom power. Its circuitry recognizes the supply voltage and adjusts itself automatically. Its performance characteristics remain essentially the same in both cases; the main difference is that the current draw at 12 volts is greater than at 48 volts. However, the 12-volt mode consumes less power and might be preferred for battery recording.
The MK 4 is often preferred by opera singers and other skilled singers.
But its natural and transparent character is also very suitable for pop and rock applications, on stage or in the studio, where equalization is part of the program.
A microphone with a clear, neutral sound quality is the ideal starting point when special "colouring" is required.n
Lire la suite
Technical sheet
- CMC6
- Frequency Range
- 20 Hz - 20 kHz
- Maximum output voltage
- 1 V (0 dBV) on 1 kΩ load
- Maximum sound pressure level (THD<0.5%)
- with MK 4: 131 dB-SPL (P48, P12)
- Low cut filter
- 20 Hz, 12 dB/Oct.
- Minimum recommended load impedance
- 1 kΩ
- Output impedance
- 42 Ω
- Maximum cable length
- > 400 m
- Power supply, standard and valid range
- P48 / 20-52 V
- P12 / 10-13 V
- Power consumption
- 4 mA (P48)
- 8 mA (P12)
- Common mode rejection (@ 1KHz)
- > 55 dB
- Output
- XLR-3M, analogue, 1 channel
- Length
- 116 mm (4")
- Diameter
- 20 mm
- Weight
- 60 g
- Surface finish
- grey matt
- Special finishes:
- Nickel, chromagreen
- MK4
- Directionality
- Cardioid
- Frequency range
- 40 Hz - 26 kHz with CMC 6 / CMR
- 40 Hz - 41 kHz with CMC 6xt
- Sensitivity
- -36.5 dB (V/Pa), 15 mV/Pa with CMC 6
- Equivalent noise (A-weighted)
- 14 dB with CMC 6
- Equivalent noise (CCIR)
- 24 dB with CMC 6
- Signal-to-noise ratio
- 80 dB with CMC 6
- Maximum sound pressure level (THD<0.5%)
- 131 dB-SPL with CMC 6
- Length
- 22 mm
- Diameter
- 20 mm
- Weight
- 17 g
- Surface finish
- Grey matt
- Special colours:
- Nickel, Chromagreen
More specifications
Fewer specifications
