Cart
Schoeps Cmit 5 Blue
- Read reviews (0)
- Free delivery
- Low prices guaranteed
- Satisfied or refunded
- 5 Years warranty
Not available at this moment
contact us
Stock in store
Not available in store
INFORM ME OF ITS ENTRY IN STOCK
I want to be notified by email
Go
The brand Schoeps
Learn more about the Schoeps brand and discover the entire catalog.
The largest network of stores in France
Find all the information on our superstores and our specialized boutiques.
Contact an expert
Our musician and enthusiast tele-consultants are here to answer all your questions.
Description
The Schoeps CMIT 5 Blue is a shotgun microphone.
The CMIT 5 is the shotgun microphone from SCHOEPS which, since its release, has set a new standard for shotgun microphones. The directionality of the CMIT 5 increases gradually with higher frequencies, resulting in a very balanced sound character. In addition, the microphone's sound level decreases smoothly but evenly for off-axis sounds, allowing them to be recorded neutrally and reducing the effects of motion during boom operation. The CMIT 5 also has a much stronger directivity than one would expect from a microphone of this length. If required, the CMIT 5 can also be used for music recordings, for example opera recordings.
The MiniCMIT, similarly, offers the features of the CMIT 5 in a compact design and is particularly recommended for use with digital wireless transmitters.
The CMIT 5 is the shotgun microphone from SCHOEPS which, since its release, has set a new standard for shotgun microphones. The directionality of the CMIT 5 increases gradually with higher frequencies, resulting in a very balanced sound character. In addition, the microphone's sound level decreases smoothly but evenly for off-axis sounds, allowing them to be recorded neutrally and reducing the effects of motion during boom operation. The CMIT 5 also has a much stronger directivity than one would expect from a microphone of this length. If required, the CMIT 5 can also be used for music recordings, for example opera recordings.
The MiniCMIT, similarly, offers the features of the CMIT 5 in a compact design and is particularly recommended for use with digital wireless transmitters.
Lire la suite
Technical sheet
- Pickup pattern
- Supercardioid / lobe-shaped
- Frequency range
- 40 Hz - 20 kHz
- Sensitivity
- -35 dB (V/Pa), 18 mV/Pa
- Equivalent noise level (A-weighted)
- 13 dB
- Equivalent noise level (CCIR)
- 24 dB
- Signal-to-noise ratio (A-weighted)
- 81 dB
- Maximum sound pressure level (THD < 0.5 %)
- 131 dB-SPL (P48)
- Maximum output voltage
- 1.3 V (2.5 dBV) with 1 kΩ load
- High shelf filter
- switchable, +5 dB at 10 kHz
- Low cut filter
- switchable, 80 Hz, 18 dB/oct.
- Proximity filter
- switchable, 300 Hz, 6 dB/oct.
- Minimum recommended load impedance
- 1 kΩ
- Output impedance
- 50 Ω
- Maximum cable length
- > 400 m
- SCHOEPS RFI Shield
- Yes
- Powering standard / Valid range
- P48 / >34 V
- Current consumption
- 4.4 mA (P48)
- Common mode rejection ratio (at 1 kHz)
- > 65 dB
- Output
- XLR-3M, analog, 1 channel
- Length
- 251 mm
- Diameter
- 21 mm
- Weight
- 95 g
- Surface finish
- blue
- custom color:
- anthracite gray, chromagreen
More specifications
Fewer specifications
