Cart
Dpa 2028-B-SL1
- Read reviews (0)
- Related accessories
- Similar products
- Free delivery
- Low prices guaranteed
- See our Terms
- 3-years warranty
Not available at this moment
contact us
Stock in store
Not available in store
INFORM ME OF ITS ENTRY IN STOCK
I want to be notified by email
Go
The brand Dpa
Learn more about the Dpa brand and discover the entire catalog.
Microphone buying guide
What microphone should you buy to record voice, guitar or drums? Everything is explained through this buying guide!
Contact an expert
Our musician and enthusiast tele-consultants are here to answer all your questions.
Vocal microphones
Designed to meet the challenges of live singing, the 2028 is a static handheld microphone that delivers precise, natural and bright vocal reproduction. Its robust design and high-end electronics make it a reliable tool for artists, sound engineers and technicians on all types of stages: concerts, places of worship (HoW), TV sets or professional events.
Simple to use, just plug it in and you'll immediately benefit from a voice that stands out in the mix, without distortion or excessive coloration. Thanks to its controlled directivity, it effectively limits feedback while capturing every nuance of the voice.
The 2028 comes with an adapter compatible with Shure, Sony and Lectrosonics wireless systems, making it an ideal solution for mobile performers or already-equipped professional installations.
Simple to use, just plug it in and you'll immediately benefit from a voice that stands out in the mix, without distortion or excessive coloration. Thanks to its controlled directivity, it effectively limits feedback while capturing every nuance of the voice.
The 2028 comes with an adapter compatible with Shure, Sony and Lectrosonics wireless systems, making it an ideal solution for mobile performers or already-equipped professional installations.
Lire la suite
Technical sheet
- Directivity
- Supercardioid
- Operating principle
- Pressure gradient
- Capsule type
- Pre-polarized condenser
- Frequency response
- 20 Hz - 20 kHz
- Effective range (±2 dB at 12 cm)
- 100 Hz - 16 kHz
- Permanent 3? order low-pass filter at 80 Hz
- Sensitivity (nominal, ±3 dB at 1 kHz)
- 5 mV/Pa; -46 dB re. 1 V/Pa
- Equivalent noise level (A-weighted)
- Typ. 22 dB(A) re. 20 µPa (max. 23 dB(A))
- Total harmonic distortion (THD < 1%)
- 136 dB SPL RMS, 139 dB SPL peak
- Dynamic range
- Typ. 117 dB
- Max. SPL level (THD 10%)
- 160 dB SPL peak
- Nominal output impedance
- 150 Ω
- Minimum load impedance
- 1 kΩ
- Cable capacity
- 100 m (328 ft)
- Balanced output principle
- Impedance balancing with active control
- Common-mode rejection ratio (CMRR)
- > 50 dB at 1 kHz
- Power supply (for full performance)
- P48 (phantom power)
- Current consumption
- max. 2.5 mA
- Connector
- XLR-3M (Pin 1: ground, Pin 2: signal + phase, Pin 3: - phase)
- Weight
- 286 g (10.1 oz)
- Microphone diameter
- 48 mm (1.9 in)
- Capsule diameter
- 19 mm (0.75 in)
- Microphone length
- 188 mm (7.4 in)
- Maximum output voltage (RMS)
- 9 V RMS ; 19 dBV ; 28 dBu
- Polarity
- +V on pin 2 for positive sound pressure
- Temperature range
- -40°C to 45°C (-40°F to 113°F)
- Relative humidity (RH)
- Up to 90% RH
- Color
- Matt black
- Polar diagram
- Supercardioid
More specifications
Fewer specifications
