Cart
Dpa 4006 A
- Read reviews (0)
- Related accessories
- Similar products
- Free delivery
- Low prices guaranteed
- Satisfied or refunded
- 3-years warranty
Not available at this moment
contact us
Stock in store
Not available in store
INFORM ME OF ITS ENTRY IN STOCK
I want to be notified by email
Go
Variation(s) of this product.
The brand Dpa
Learn more about the Dpa brand and discover the entire catalog.
Microphone buying guide
What microphone should you buy to record voice, guitar or drums? Everything is explained through this buying guide!
Contact an expert
Our musician and enthusiast tele-consultants are here to answer all your questions.
Description
The 4006 is an omnidirectional studio microphone designed to offer total sonic transparency. Thanks to its high sensitivity, linear frequency response from 10 Hz to 20 kHz (±2 dB) and extremely low noise level, it is capable of capturing the finest details with remarkable depth and precision.
This mic is particularly well suited to a wide variety of acoustic instruments, revealing the full richness of high frequencies with exceptional definition and no coloration. Whether for classical, acoustic or ambient recordings, the 4006 guarantees natural, true-to-source reproduction.
This mic is particularly well suited to a wide variety of acoustic instruments, revealing the full richness of high frequencies with exceptional definition and no coloration. Whether for classical, acoustic or ambient recordings, the 4006 guarantees natural, true-to-source reproduction.
Lire la suite
Technical sheet
Directivity - Omnidirectional
Operating principle - Pressure
Capsule type - Pre-polarized capacitor
Frequency response - 10 Hz - 20 kHz
Effective range (±2 dB) - 10 Hz - 20 kHz
Sensitivity (nominal, ±2 dB at 250 Hz) - 36 mV/Pa; -28.9 dB re. 1 V/Pa
Equivalent noise level (A-weighted) - Typ. 15 dB(A) re. 20 µPa (max. 17 dB(A))
Equivalent noise level (ITU-R BS.468-4) - Typ. 27 dB (max. 29 dB)
Distortion (THD < 1%) - 133 dB SPL RMS, 136 dB SPL peak
Dynamic range - Typ. 121 dB
Max. SPL level (THD 10%) - 146 dB SPL peak
Switchable attenuator / filters - 0 dB / -20 dB
Nominal output impedance - 200 Ω
Minimum load impedance - 2 kΩ
Cable capacity - 100 m (328 ft)
Balanced output principle - Impedance balancing with active control
Common-mode rejection ratio (CMRR) - > 60 dB
Power supply (for full performance) - P48 (phantom power)
Current consumption - 2.8 mA
Connector - XLR-3M (Pin 1: ground, Pin 2: signal + phase, Pin 3: - phase)
Weight - 163 g (5.7 oz)
Microphone diameter - 16 - 19 mm (0.6 - 0.75 in)
Capsule diameter - 16 mm (0.6 in)
Microphone length - 170 mm (6.7 in)
Maximum output voltage (RMS) - 8,0 V
Polarity - +V on pin 2 for positive acoustic pressure
Temperature range - -40°C to 45°C (-40°F to 113°F)
Relative humidity (RH) - Up to 90% RH
Matching tolerance (frequency response and sensitivity) - ±0.5 dB
Phase deviation (stereo kit) - < 5°
Color - Matt black
Polar diagram - Omnidirectional
More specifications
Fewer specifications
