Cart
Dpa 4006 C
- Read reviews (0)
- Related accessories
- Similar products
- Free delivery
- Low prices guaranteed
- Satisfied or refunded
- 3-years warranty
Not available at this moment
contact us
Stock in store
Not available in store
INFORM ME OF ITS ENTRY IN STOCK
I want to be notified by email
Go
Variation(s) of this product.
The brand Dpa
Learn more about the Dpa brand and discover the entire catalog.
Microphone buying guide
What microphone should you buy to record voice, guitar or drums? Everything is explained through this buying guide!
Contact an expert
Our musician and enthusiast tele-consultants are here to answer all your questions.
Description
The 4006 is a benchmark omnidirectional condenser microphone, renowned for its exceptional transparency in all recording situations. Its ability to reproduce every nuance of sound with impressive depth and detail makes it an essential choice for professional studios.
Its ultra-linear frequency response (10 Hz to 20 kHz ±2 dB), combined with high sensitivity and extremely low noise floor, guarantees faithful, natural, coloration-free recording. It excels on a wide range of instruments, thanks in particular to the precision of its high frequencies.
Its ultra-linear frequency response (10 Hz to 20 kHz ±2 dB), combined with high sensitivity and extremely low noise floor, guarantees faithful, natural, coloration-free recording. It excels on a wide range of instruments, thanks in particular to the precision of its high frequencies.
Lire la suite
Technical sheet
- Directivity
- Omnidirectional
- Operating principle
- Pressure
- Capsule type
- Pre-polarized capacitor
- Frequency response
- 10 Hz - 20 kHz
- Effective range (±2 dB)
- 10 Hz - 20 kHz
- Sensitivity (nominal, ±2 dB at 250 Hz)
- 36 mV/Pa; -28.9 dB re. 1 V/Pa
- Equivalent noise level (A-weighted)
- Typ. 15 dB(A) re. 20 µPa (max. 17 dB(A))
- Equivalent noise level (ITU-R BS.468-4)
- Typ. 27 dB (max. 29 dB)
- Distortion (THD < 1%)
- 133 dB SPL RMS, 136 dB SPL peak
- Dynamic range
- Typ. 121 dB
- Max. SPL level (THD 10%)
- 146 dB SPL peak
- Switchable attenuator / filters
- 0 dB / -20 dB
- Nominal output impedance
- 200 Ω
- Minimum load impedance
- 2 kΩ
- Cable capacity
- 100 m (328 ft)
- Balanced output principle
- Impedance balancing with active control
- Common-mode rejection ratio (CMRR)
- > 60 dB
- Power supply (for full performance)
- P48 (phantom power)
- Current consumption
- 2.8 mA
- Connector
- XLR-3M (Pin 1: ground, Pin 2: signal + phase, Pin 3: - phase)
- Weight
- 163 g (5.7 oz)
- Microphone diameter
- 16 - 19 mm (0.6 - 0.75 in)
- Capsule diameter
- 16 mm (0.6 in)
- Microphone length
- 170 mm (6.7 in)
- Maximum output voltage (RMS)
- 8,0 V
- Polarity
- +V on pin 2 for positive acoustic pressure
- Temperature range
- -40°C to 45°C (-40°F to 113°F)
- Relative humidity (RH)
- Up to 90% RH
- Matching tolerance (frequency response and sensitivity)
- ±0.5 dB
- Phase deviation (stereo kit)
- < 5°
- Color
- Matt black
- Polar diagram
- Omnidirectional
More specifications
Fewer specifications
