Cart
The brand Fuzzrocious
Learn more about the Fuzzrocious brand and discover the entire catalog.
Guitar and bass effects shopping guide
How to find the processor(s) that correspond to your needs and expectations amongst the hundreds of references currently available?
Contact an expert
Our musician and enthusiast tele-consultants are here to answer all your questions.
Reverb, delay & echo effect pedal
FUZZROCIOUS Afterlife is a reverb pedal that does more and looks more fun than you’re plain old reverb pedal. Sprung from a conversation with Young Widows, they sparked the idea for a reverb that is lush, controllable in decay, AND offers a second output that sends a totally wet reverbed signal with zero dry signal. You can send the second output to the second input of your amp or even your second amp for a bi-amp setup.
When both outputs are utilized, a jangly, seasick, back and forth sound occurs. When the Repeats 1 knob is set to a longer repeats setting, you can get some insane oscillation! If R2 is dimed, when you hold down the left footswitch, you’ll achieve hella oscillations! …but wait! THERE’S MORE!!! When the pedal is on/active, you can use the 2nd footswitch to jump between “Repeats 1” and “Repeats 2” for two repeats settings (think short decay/long oscillating decay).
When the pedal is off, if the “Repeats 2” knob is fully clockwise, the second momentary footswitch sends oscillation to the second output. Please note that when the pedal is bypassed, output 2 will output NO sound (unless R2 is dimed and you’re holding down the left footswitch). This is a Belton brick-based reverb based on the D Verb.
When both outputs are utilized, a jangly, seasick, back and forth sound occurs. When the Repeats 1 knob is set to a longer repeats setting, you can get some insane oscillation! If R2 is dimed, when you hold down the left footswitch, you’ll achieve hella oscillations! …but wait! THERE’S MORE!!! When the pedal is on/active, you can use the 2nd footswitch to jump between “Repeats 1” and “Repeats 2” for two repeats settings (think short decay/long oscillating decay).
When the pedal is off, if the “Repeats 2” knob is fully clockwise, the second momentary footswitch sends oscillation to the second output. Please note that when the pedal is bypassed, output 2 will output NO sound (unless R2 is dimed and you’re holding down the left footswitch). This is a Belton brick-based reverb based on the D Verb.
Lire la suite
Technical sheet
- FUZZROCIUOS Afterlife
- SKU FUZ-AFTERLIFE
- Reverb effect pedal
- Made in USA
- 2017
- 2x independent repeat controls
- Dedicated output for wet signal
- MIX – fully counterclockwise is full reverb mixed with clean tone. As you rotate clockwise, reverb disappears
- REPEATS 1 – as you rotate clockwise, decay increases towards oscillation
- REPEATS 2 – as you rotate clockwise, decay increases towards oscillation. Only active when the left footswitch is depressed
- VOLUME – makes the output of Output 2 louder or quieter
- Power supply via optional 9V DC 2.1mm (center negative tip) adapater
- English manual : http://fuzzrociouspedals.com/wp-content/uploads/2015/10/manual_afterlife.pdf
More specifications
Fewer specifications
