Cart
Jhs Colour Box V2 10th Anniversary
- Read reviews (0)
- Related accessories
- Similar products
- Free delivery
- Low prices guaranteed
- Satisfied or refunded
- 3-years warranty
In stock
shipped under 2/3 days
Stock in store
Not available in store
The brand Jhs
Learn more about the Jhs brand and discover the entire catalog.
Guitar and bass effects shopping guide
How to find the processor(s) that correspond to your needs and expectations amongst the hundreds of references currently available?
Contact an expert
Our musician and enthusiast tele-consultants are here to answer all your questions.
Electric guitar preamp
Limited edition vintage color and knobs for 2024 in celebration of 10 years of Colour Box.
Colour Box v2 has the same features as v1, with many improvements such as extended EQ settings, a Hi/Lo selector for big dynamics in clean sound, and the ability to phantom power your condenser pickups.
The gain section in red has 3 settings, including Pre-Vol, which controls the amount of gain between the 2 internal gain stages. It acts like a Drive or Gain control, adding more bite, distortion and even fuzz as you increase the gain.
The 5-position Step selector increases gain by +18dB, +23dB, +28dB, +33dB or +39dB.
Colour Box v2 has a new Hi/Lo selector that controls the amount of clean-sound dynamics available. In Lo mode, you can easily obtain ultra-clear sounds without saturation, excellent for refining the sound when distortion is not necessary. In Hi mode, the Colour Box v2 will more easily saturate to give a wide spectrum of overdrive, distortion and fuzz sounds.
A -20dB selector on the right-hand side, which works with the XLR input, can help reduce the volume for mics with high output levels.
The EQ section in blue has 3 new Shift settings corresponding to its standard Treble, Middle and Bass settings. The Shift settings adjust the frequency range controlled by the Treble, Middle and Bass settings above. The center frequency of the Shift settings are Treble 10KHz, Middle 1KHz, Bass 120Hz.
Frequencies controlled by the Shift settings :
- Treble: 1kHz to 15kHz with +/- 15dB
- Middle: 160Hz to 2.5kHz with +/- 10dB
- Bass: 20Hz to 400Hz with +/-15dB
The Hi Pass section is activated via the selector under the Hi Pass setting, and runs from 60Hz to 800Hz with a slope of 6dB per octave.
Colour Box v2 has a combination of jack and XLR inputs for use with instruments or microphones. Choose your input with the INST/XLR input selector on the right-hand side.
Colour Box v2 has the same features as v1, with many improvements such as extended EQ settings, a Hi/Lo selector for big dynamics in clean sound, and the ability to phantom power your condenser pickups.
The gain section in red has 3 settings, including Pre-Vol, which controls the amount of gain between the 2 internal gain stages. It acts like a Drive or Gain control, adding more bite, distortion and even fuzz as you increase the gain.
The 5-position Step selector increases gain by +18dB, +23dB, +28dB, +33dB or +39dB.
Colour Box v2 has a new Hi/Lo selector that controls the amount of clean-sound dynamics available. In Lo mode, you can easily obtain ultra-clear sounds without saturation, excellent for refining the sound when distortion is not necessary. In Hi mode, the Colour Box v2 will more easily saturate to give a wide spectrum of overdrive, distortion and fuzz sounds.
A -20dB selector on the right-hand side, which works with the XLR input, can help reduce the volume for mics with high output levels.
The EQ section in blue has 3 new Shift settings corresponding to its standard Treble, Middle and Bass settings. The Shift settings adjust the frequency range controlled by the Treble, Middle and Bass settings above. The center frequency of the Shift settings are Treble 10KHz, Middle 1KHz, Bass 120Hz.
Frequencies controlled by the Shift settings :
- Treble: 1kHz to 15kHz with +/- 15dB
- Middle: 160Hz to 2.5kHz with +/- 10dB
- Bass: 20Hz to 400Hz with +/-15dB
The Hi Pass section is activated via the selector under the Hi Pass setting, and runs from 60Hz to 800Hz with a slope of 6dB per octave.
Colour Box v2 has a combination of jack and XLR inputs for use with instruments or microphones. Choose your input with the INST/XLR input selector on the right-hand side.
Lire la suite
Technical sheet
- for electric guitar Yes
- Preamp Yes
- Technology Transistors
- Add an output transformer
- 48v phantom power
- Shift controls for precise EQ control
- Hi/Lo selector for high dynamics in clean sound
- 100% clean signal even on acoustic guitar
- Silent activation
- Standard 9-volt DC power supply
