Neumann TLM 103 Studio Set
- Read reviews (5)
- Version Pack
- Related accessories
- Similar products
The brand Neumann
Microphone buying guide
Contact an expert
Our musician and enthusiast tele-consultants are here to answer all your questions.
Description
The TLM 103 Studio Set is a large-diaphragm condenser microphone from Neumann.
Key features of the Neumann TLM 103 Studio Set
- Pressure gradient transducer for uniform frequency response and proximity effect.
- Cardioid directional pattern for cleaner recordings and reduced feedback.
- Transformerless circuit for transparent, accurate, true-to-source sound with minimal noise.
- Frequency range from 20 Hz to 20 kHz for a microphone that faithfully captures the entire audible sound spectrum.
- Nominal impedance of 50 ohms for efficient sound transfer and optimum compatibility with standard audio equipment.
- Noise level of 7 dB-A for clear recordings and capture of a wide range of sound levels.
- Sound pressure up to 138 dB without pre-attenuation for distortion-free recordings of dynamic sources, from the softest to the loudest.
- Dynamic range of 131 dB enables the TLM 103 microphone to reproduce sound accurately, capturing all the nuances of the original sound source.
- High sensitivity of 23 mV/Pa for improved signal-to-noise ratio.
- Classic aesthetics allow the unit to fit perfectly into any studio.
- Rugged construction, designed to last and withstand the rigors of intensive use.
Features of the Neumann TLM 103 Studio Set large-diaphragm condenser microphone
Large-diaphragm condenser capsule
The TLM 103 features a large-diaphragm capsule derived from the famous K67/87 capsule used in the legendary U 87 microphone. This capsule offers high sensitivity and a wide frequency response, enabling it to capture a variety of sound sources, from vocals to musical instruments, with great precision.
Transformerless circuit
This Neumann condenser microphone uses a transformerless circuit, which helps minimize distortion and maintain a clean, transparent audio signal, even at high sound pressure levels. The device captures sound details and nuances more faithfully, especially the rapid attacks of percussive instruments.
Maximum sound pressure level
With a maximum sound pressure level (SPL) of 138 dB, the TLM 103 can handle very powerful sound sources, without any distortion. This makes it particularly suitable for recording powerful instruments such as guitar amplifiers or drums, including the most powerful bass drum hits.
Ultra-low self-noise
The Neumann microphone has an extremely low self-noise level of 7 dB(A), which is practically inaudible. Thanks to this essential feature, you can achieve clear, detailed recordings, requiring less processing to eliminate background noise, even with weak sound sources or sensitive environments.
Explore new possibilities with the Neumann TLM 103 Studio Set microphone
We recommend this product for home studios, professional recording studios, musicians or podcasters looking for a high-quality microphone to capture their productions with exceptional clarity and precision.
Our experts' opinion
- The TLM's cardioid polar pattern is a major asset for studio recording. It allows you to focus on the main sound source, while minimizing sound coming from the sides and rear.
- Neumann is a brand that consistently delivers top-quality equipment. This microphone confirms this claim one hundred percent, offering impeccable sound quality and a pleasant grip.
- We were impressed by the microphone's low self-noise. It captures subtle details and minute nuances, even in the quietest passages.
Technical sheet
- Acoustical operating principle
- Pressure gradient transducer
- Directional Pattern
- Cardioid
- Frequency Range
- 20 Hz ... 20 kHz
- Sensitivity at 1 kHz into 1 kohm
- 23 mV/Pa = -32.5 dBV ± 1 dB
- Rated Impedance
- 50 ohms
- Rated load impedance
- 1 kohms
- Equivalent noise level, CCIR
- 17.5 dB
- Equivalent noise level, A-weighted
- 7 dB-A
- Maximum SPL for THD 0.5%
- 138 dB
- Signal-to-noise ratio, CCIR (re. 94 dB SPL)
- 76.5 dB
- Signal-to-noise ratio, A-weighted (re. 94 dB SPL)
- 87 dB
- Maximum output voltage
- 13 dBu
- Supply voltage (P48, IEC 61938)
- 48 V ± 4 V
- Current consumption (P48, IEC 61938)
- 3 mA
- Matching connector
- XLR 3 F
- Weight
- approx. 450 g
- Diameter
- 60 mm
- Length
- 132 mm