Ref : 81836
- Dmx compatible : yes
Specifications
Physical data
- Dimensions (W x H x D): 290 x 189 x 360 mm
- Weight: 7.1 kg
Dynamic effects
- Color temperature: 2700 K - 7800 K
- Pre-programmed CTCs: 2700 K to 7800 K in steps of about 100 K
- Dimmer: Electronic, 0 - 100%, four curves
- Stroboscope and pulsations: Random, regular, programmable speed
- Zoom: Motorized, 10°-60°
- Pan: 540°°.
- Tilt: 220°.
Optics
- Sources: 12 LEDs 10 W CWUW
- Minimum lifetime of LEDs: 50,000 h (>70% initial luminous flux)*
- Beam width (to one tenth of flow): 10° - 60°.
*Data obtained under manufacturer test conditions
Control and programming
- Control system: DMX
- DMX channels: 12
- 16-bit control: dimmer, pan and tilt
- Interface: Control panel with backlit LCD display
- DMX standard: USITT DMX512/1990
Construction
- Construction: Thermoformed flame-retardant plastic
- Color: Black
- Protection class: IP 20
Installation
- Suspension: Latch base ¼ for hook
- Placement: Indoor only, fixed on surface or structure
- Orientation: All
- Minimum distance to illuminated surfaces: 200 mm
- Minimum distance to combustible materials: 100 mm
- Minimum space around air inlets and ventilators: 100 mm
Connections
- Power input: Neutrik PowerCon
- Feed feedback: Neutrik PowerCon
- DMX input / copy: XLR 3 and 5 point locking subbases
Electricity
- Mains: 100-240 V nominal, 50/60Hz
- Integrated power supply: Switching, self-adaptive
- Fuse: T3.15A
- Recommended thermal magneto-thermal circuit breaker*: Type D
*According to IEC 60898/UL489/CSA C222 No 5
Typical power and current
- 120 V, 60 Hz : 1.3 A, 150 W, PF 099
- 230 V, 50 Hz : 0.7 A, 150 W, PF 094
- Typical inrush current, RMS, ½ cycle at 240 VAC : 11.3 A
Measurements made at nominal voltage, typical, non-maximum values. Consider a variation of +/-10%.
Thermal data
- Cooling : Forced air
- Maximum ambient temperature (Ta max): 40° C
- Minimum ambient temperature (Ta min): 0°C
- Total dissipation (calculated +/- 10%): 430 BTU/h
Approvals
- EU safety: EN EN 60598-2-17 (EN605989-1), EN 62471, EN 62493
- CEM EU: IN 55015, 55032, 55103-2, 61000-3-2, 61000-3-3-3, 61547
Supplied accessories
- Power cable, 0.75 mm² / 18 AWG, 1.5 m, 6 A, UL approved - H05VV-F, without plug
- An Omega base for hook fixing
Accessories Accessories
- 16 A cables for cascade connection-
- Power cable, 3 m (98 ft), 1.5 mm² / 14 AWG, SJT, H05VVV-F, with PowerCon P/N 11541508 plug
- Power cable, 1.4 m (46 ft), 1.5 mm² / 14 AWG, SJT, H05VVV-F, with PowerCon P/N 11541509 plug
- Copy cable, 2.25 m (74 ft), 1.5 mm² / 14 AWG, SJT, H05VVV-F, with PowerCon P/N 11541510 plug
- Copy cable, 3.25 m (107 ft), 1.5 mm² / 14 AWG, SJT, H05VVV-F, with PowerCon P/N 11541511 plug
Power supply connectors
- Neutrik PowerCon NAC3FCA Neutrik PowerCon connector for cable mounting, power supply, blue P/N 05342804
- Neutrik PowerCon NAC3FCB Neutrik PowerCon connector cable mount, power supply, grey P/N 05342805
Installation accessories
- Jaw Clamp P/N 91602005
- G Hook (Vertical suspension only) P/N 91602003
- Quick Trigger Hook (Vertical suspension only) P/N 91602007
- Safety sling, CMU 50 kg P/N 91604003
- DMX termination plug, XLR 3 P/N 91613017
Related accessories
- RUSH Software Uploader 1™ P/N 91611399
Order codes
- RUSH™ MH 6 Wash CT, supplied in cardboard P/N 90280090