Cart
Dpa 4011C
- Read reviews (0)
- Related accessories
- Similar products
- Free delivery
- Low prices guaranteed
- Satisfied or refunded
- 3-years warranty
Not available at this moment
contact us
Stock in store
Not available in store
INFORM ME OF ITS ENTRY IN STOCK
I want to be notified by email
Go
The brand Dpa
Learn more about the Dpa brand and discover the entire catalog.
Microphone buying guide
What microphone should you buy to record voice, guitar or drums? Everything is explained through this buying guide!
Contact an expert
Our musician and enthusiast tele-consultants are here to answer all your questions.
Description
The DPA 4011C condenser microphone is recognized worldwide as a benchmark in sound quality, both in the recording studio and in live applications. Thanks to its precision design and high-quality components, it guarantees faithful, balanced reproduction rich in detail.
Popular with recording engineers and artists alike, this microphone delivers consistent performance, with remarkable clarity, excellent sensitivity and low noise. It adapts to a wide variety of sources: vocals, acoustic instruments, amplified instruments and percussion.
Popular with recording engineers and artists alike, this microphone delivers consistent performance, with remarkable clarity, excellent sensitivity and low noise. It adapts to a wide variety of sources: vocals, acoustic instruments, amplified instruments and percussion.
Lire la suite
Technical sheet
Directivity - Cardioid
Operating principle - Pressure gradient
Capsule type - Pre-polarized condenser
Frequency response - 20 Hz - 20 kHz
Effective range (±2 dB at 30 cm) - 40 Hz - 20 kHz
Sensitivity (nominal, ±2 dB at 1 kHz) - 10 mV/Pa; -40 dB re. 1 V/Pa
Equivalent noise level (A-weighted) - Typ. 18 dB(A) re. 20 µPa (max. 20 dB(A))
Equivalent noise level (ITU-R BS.468-4) - Typ. 25 dB
Distortion (THD < 1%) - 136 dB SPL RMS, 139 dB SPL peak
Dynamic range - Typ. 121 dB
Max. SPL level (THD 10%) - 152 dB SPL peak
Nominal output impedance - 100 Ω
Minimum load impedance - 2 kΩ
Cable capacity - 100 m (328 ft)
Balanced output principle - Impedance balancing with active control
Common-mode rejection ratio (CMRR) - > 50 dB
Power supply (for full performance) - P48 (phantom power)
Current consumption - 2.8 mA
Connector - XLR-3M (Pin 1: ground, Pin 2: signal + phase, Pin 3: - phase)
Weight - 58 g (2 oz)
Microphone diameter - 19 mm (0.75 in)
Capsule diameter - 19 mm (0.75 in)
Microphone length - 64 mm (2.5 in)
Maximum output voltage (RMS) - > 4 V
Polarity - +V on pin 2 for positive acoustic pressure
Temperature range - -40°C to 45°C (-40°F to 113°F)
Relative humidity (RH) - Up to 90% RH
Matching tolerance (frequency response and sensitivity) - ±1 dB
Phase deviation (stereo kit) - < 10°
Polar diagram - Cardioid
More specifications
Fewer specifications
