Cart
Dpa 4015 A
- Read reviews (0)
- Related accessories
- Similar products
- Free delivery
- Low prices guaranteed
- Satisfied or refunded
- 3-years warranty
Not available at this moment
contact us
Stock in store
Not available in store
INFORM ME OF ITS ENTRY IN STOCK
I want to be notified by email
Go
The brand Dpa
Learn more about the Dpa brand and discover the entire catalog.
Microphone buying guide
What microphone should you buy to record voice, guitar or drums? Everything is explained through this buying guide!
Contact an expert
Our musician and enthusiast tele-consultants are here to answer all your questions.
Description
This DPA 4015A professional condenser microphone is ideally positioned between an omnidirectional and a conventional directional microphone. Thanks to its perfectly controlled intermediate pick-up pattern, it offers natural, precise and balanced pick-up, ideal for situations where openness and control are required.
Its main advantage: a totally linear off-axis response. Unlike more conventional microphones, sounds captured off-axis are not distorted, but simply attenuated gently, while retaining their authentic character. This makes it an excellent choice for environments where sound leakage is unavoidable but must remain faithful.
Its main advantage: a totally linear off-axis response. Unlike more conventional microphones, sounds captured off-axis are not distorted, but simply attenuated gently, while retaining their authentic character. This makes it an excellent choice for environments where sound leakage is unavoidable but must remain faithful.
Lire la suite
Technical sheet
Directivity - Wide cardioid
Operating principle - Pressure gradient
Capsule type - Pre-polarized capacitor
Frequency response - 20 Hz - 20 kHz
Effective range (±2 dB at 60 cm) - 40 Hz - 20 kHz
Sensitivity (nominal, ±2 dB at 1 kHz) - 10 mV/Pa; -40 dB re. 1 V/Pa
Equivalent noise level (A-weighted) - Typ. 18 dB(A) re. 20 µPa (max. 20 dB(A))
Equivalent noise level (ITU-R BS.468-4) - Typ. 25 dB (valid with attenuator at 0 dB or -20 dB)
Distortion (THD < 1%) - 136 dB SPL RMS, 139 dB SPL peak
Dynamic range - Typ. 121 dB
Max. SPL (THD 10%) - 159 dB SPL peak
Switchable attenuator / filters - 0 dB / -20 dB
Nominal output impedance - 200 Ω
Minimum load impedance - 2 kΩ
Cable capacity - 100 m (328 ft)
Balanced output principle - Impedance balancing with active control
Common-mode rejection ratio (CMRR) - > 60 dB
Power supply (for full performance) - P48 (phantom power)
Current consumption - 2.8 mA
Connector - XLR-3M (Pin 1: ground, Pin 2: signal + phase, Pin 3: - phase)
Weight - 158 g (5.6 oz)
Microphone diameter - 19 mm (0.75 in)
Capsule diameter - 19 mm (0.75 in)
- <title
More specifications
Fewer specifications
